About JDSK Car Assembly Line
Conveying Assembly Line: The typical car(Monocoque Carbody Type) assembly line, mainly including three main assembly, interior Assembly, chassis Assembly and the final assembly, and also include some off-line module sub-assembly line, such as doors, dashboard, power assembly and other components.
In addition, between the coating and the assembly need to set the body storage conveyor line,will use the line type of slippery, product chain, friction chain etc. The main role is as follows: painting / assembly buffer; multi-species selection; The current car assembly line of the typical selection for the interior line using the floor skateboard delivery system, the chassis line with the air hanging product chain / EMS / TTS / reverse skateboard, the final assembly line with wide or double chain plate chain. The door is divided into the use of hanging over the air hanging chain / EMS and so on. Powertrain module assembly line with towline / electric track car / AGV and so on.
Filling equipment: antifreeze, brake fluid, power steering fluid, refrigerant, etc. In the car assembly, the general use of a vacuum, automatic leak detection, automatic filling and other functions of the filling machine, such as fuel, washing liquid , Oil and other ordinary quantitative filling machine. Bolt fastening equipment and special assembly equipment: the key components of the general use of electric screw tightening machine, you can effectively control the tightening torque, monitoring the tightening process. Special equipment includes a large number of power assistants and robots, both to reduce the labor intensity of workers, but also to ensure the quality of the assembly. Applications include disassembly of doors, front and rear suspension installation, sunroof installation, dashboard installation, seat installation, tire installation, windshield automatic glue and so on.
Test equipment: In accordance with national norms, the factory test line is generally comprised by the sliding tester, steering tester, headlamp tester, brake tester, speed table tester, exhaust gas analyzer, chassis inspection and other equipment. For independent suspension vehicles, should also be equipped with wheel locator. After the completion of the factory test, vehicles will be into the rain test, the car seal performance testing. Usually will set a repair area on the testing line side, for vehicle failed any one testing project, will enter the repair area to rework and then return to the test line to have retest, until qualified.
Car gripping flip spreader
Car assembly hoist
Automotive skidding system
Car air accumulation chain
And more automation assembly line